QUA successfully supplied its FEDI stacks for the high efficiency reverse osmosis permeate treatment. The water treated by FEDI exceeded the plants requirements. Due to FEDI’s enhanced design, water containing lower silica and conductivity level is produced, than could be by conventional technologies.
Project Background
The Egyptian Ethylene and Derivatives Company (ETHYDCO) is a joint venture company established with the purpose to produce Ethylene, Butadiene and their derivatives (Polyethylene, Poly Butadiene).
As part of ETHYDCO’s petrochemical complex in Alexandria, a 460,000 T/Y ethylene plant and a 20,000 T/Y butadiene extraction plant were built.
For its water needs, ETHYDCO took the initiative to contract a zero liquid discharge plant that is the first of its kind in Egypt. The feed water to the plant is a mix of treated effluent and Nile River water. Due to the high variability of the inlet feed water, technologies designed to operate over a wide range of feed conditions were evaluated.
QUA’s FEDI was chosen due to its capability to handle variable feed conditions with its two-stage design.
FEDI Model: FEDI-2 30X
No. of Streams: 2 x 465 gpm (2 x 105 m3/hr)
No. of Stacks: 60
Silica as SiO2: < 20 ppb
Conductivity: 0.1 mS/cm
QUA Solution
QUA successfully supplied its Fractional Deionization (FEDI®) stacks for the RO permeate treatment. This treated water is demineralized for cooling tower blowdown uses at the plant.
The complete treatment system comprises of a membrane pretreatment system, a High Efficiency Reverse Osmosis (HEROTM) system, followed by FEDI. A brine concentrator, crystallizer, and sludge treatment system are also employed to ensure ZLD capability.
The FEDI system successfully treats single pass RO water water to be used for cooling tower blowdown. The water treated by FEDI exceeded the plant’s requirements, particularly in the removal of silica that was possible due to FEDI’s enhanced design.
For more, click here.
Save as PDF